Serenity Network Video Recorder Bedienungsanleitung Seite 1

16 Channel Network Video RecorderUser’s Manual www.atvideo.com Model : NVR16 Series English Version 0.98

102. Installation 2.1 Connection • Connecting to the RJ-45 Connect a standard RJ-45 cable to the network port of the network camera. Generall

11• Connecting RS232 An RS232 port is provided to connect a text-in device like a POS. Use a RS232 cable with a DB-9S (female) connector to connect

12 During the NVR operation, a blue HDD indicator means that internal HDD is installed and functioning normally. Caution:

13• Configuration 1. Standalone Configuration. Note: IP cameras can be connected in t

142. Multi-location Configuration.

152.2 Network Connection and IP assignment The Network Video Recorder supports the operation through the network. When the NVR is first connected to

162.3 Connecting to the Website The Network Video Recorder supports the operation through the network. When the NVR is first connected to the networ

17 [Step2] Easy Installation makes the NVR detect ONVIF based all of network cameras and register automa

18 [Step3] The NVR detects all of IP cameras connected in the intranet and displays in the camera list.

19 All cameras detected are displayed in the list. Display the name and IP address the selected camera. The name will be updated automatically depen

WARNTO REDRAIN ORGRILLS CAUT EXPLA PREC Safety Should anunplug thpersonne Unplug thbe used fcord, pull Allow adebuild-up. blankets, that

20 The NVR displays the registered camera list in the Camera Registration window.

21 If you want to configure more detail information for a selected camera, click the ONVIF Setup button in the Setup Wizard window. You ca

22When you click the Format button, the NVR ask you to set the storage to record or archive device. If the storage is formatted to archiving device,

233. Configuration 3.1 NVR Setup Select “Live” tab on the main window of the Client s/w. You can see the camera list currently registered. Select N

242) User You can add and delete and users. When adding a user, you can assign authority levels to the users. User access cont

25• User ID and Password The user ID and Password must be 1 to 15 characters in length. It supports alphabets (A-Z), numbers (0-9), and underscore(

26-. Synchronize with NTP server: Synchronize the date and time of the NVR automatically with an NTP (Network Time Protocol) server. Enter the IP add

27 -. Default router: Specify the IP address of the default router (gateway) used for connecting devices attached to different networks and network s

28default. Although a DHCP server is mostly used to set an IP address dynamically, it is also possible to use it to set a static, known IP address fo

29 Refer to [step3] of Chapter 2.3 for more detail operation. 8) Record Storage The list of available hard disk drives is dis

3 FCC COMPLIANCE STATEMENT INFORMATION TO THE USER: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE,

30• HDD List On top of the screen the types and statuses of internal HDDs, external HDDs, and/or NAS devices currently connected to the system are l

313.1.2 Camera Setup You can set the NVR to detect and register your cameras connected from network. 1) Easy Install Refer t

322) Camera Registration The NVR searches and displays all cameras connected in the internet besides the intranet. All cameras

33• Search Camera Click the Search Cameras button to search cameras and the Camera Discovery window appears. Select one of three in Search Mode

34 Select one or several cameras from the list and click the Register button to register. The Login window appears and inquires ID and Password.

35 The NVR displays the registered camera list in Camera Registration window. When you select a camera

36The network camera provides access to H.264, and Motion JPEG video streams, and to the list of available stream profiles. The NVR and clients can a

37 -. Audio: Set up an encoder for audio. Select an audio source to configure in the Source list. Clicking the Audio button allows you to configure t

38 3.1.3 Record 1) Storage Refer to “Record Storage of Chapter 3.1.1”.

392) Record Set a weekly recording schedule for each channel. A combination of a schedule and an event is possible. • Schedu

4 IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do

403) Archive The NVR supports schedule data backup which archives periodically video data in record storage to archive storage. You can set storages

413.1.4 Event This menu allows setting event options such as Alarm-In, Motion, Video Loss, System Event, and Log. The NVR starts recording with sett

42 • NVR Alarm Event The NVR have 2 input and 2 output alarm ports for itself. -. On/Off: Choose an item from the drop-down list. When

43Set the On/Off, Dwell Time, Action, Recording. Click each column in the list to configure settings. • Motion Event -. On/Off: Choose an item fr

444) System You can configure settings for the system event. The Disk Temperature and S.M.A.R.T. in the System Event are supported.

455) Text-In You can configure settings for the text-in event. Set the On/Off, Dwell Time, Type, Action, Recording. Click each column in the list

46 3.1.5 Network Setting in regard to network can be executed. Settings for IP, DNS, Host Name, Port, and ARP/Ping can be establ

472) Intranet Refer to “Intranet of Chapter 3.1.1”.

483) Service • Host Name Configuration - Host Name – enter the host name to be used as device information in the client

494) IP Filtering Checking the Enable IP address filtering box enables the IP address filtering function. Up to 10 IP addresse

5Contents 1. Description- ------------------------------------------------------------------ 7 1.1 Components - - --------------------------------

505) SMTP The NVR can be configured to send event and error email messages via SMTP (Simple Mail Transfer Protocol). • SMTP

51 -. Login Method: Set the Weakest method allowed to the highest/safest method supported by the mail server. The most secure method is listed in

52 * Password: Enter a password to be used for accessing the DDNS server. * Confirm: Enter a password again to confirm it. * Maximum time interval:

53 The main benefits of a QoS-aware network are: - The ability to prioritize traffic and thus allow critical flows to be serve

9) NAT A broadbInternetthe Interpre-conf Use NATfrom thean exter Notes: -. For NA-. The br“NAT rbut thTraversal b

55• NAT traversal Settings - Enable - when enabled, the NVR attempt to configure port mapping in a NAT router on your network, using UPnP™. Note

56Zeroconf is built on three core technologies: • Assignment of numeric network addresses for networked devices (link-local address auto configurati

573.1.6 System 1) Information You can name the Device Name for the NVR. This page is very useful when you refer device information after installati

583) Date/Time Refer to “Date/Time of Chapter 3.1.1”. 4) Upgrade

59Carry out the upgrade by importing an upgrade file and pressing the Upgrade button. During the upgrade, do not turn off the power of the NVR. And t

6 3.1.6 System ------------------------------------------------------------------------------------------ 57 1) Information ------------------

606) Maintenance • Maintenance -. Restart: The system is restarted without changing any of the settings. Use this method

616) Log The support page provides valuable information on troubleshooting and contact information, should you require technical assistance.

62 The description of each field follows. y Connect Site: Connects all cameras currently registered. y Connect Channel: Connects a chann

4.1.1. S You can Division displayed • Scre 2x2 4.1.2 A The NVRbetween 4.1.3 P Click on the chanpage to • PTZ -. DiChca -. ZoAd

-. PrSem 4.1.4 E You can display lmonitori • EvenDispIn an reset button:et the presetbutton toove the PTZ E

65 4.2 Record Playback Select “Record Playback” tab on main window of the Client s/w. You can see the camera list currently registered. Select NVR o

66 Note: Click the “Calendar” icon to see calendar window If there is data for a channel, a white section will be displayed on a 24-hour

67 • Clip Copy Click the button to start the clip-copy. Clip-Copy allows the NVR to clip a video segment already stored in the storage and sav

68 • Backup Click the button to start the backup. Backup allows the NVR to clip a video segment already stored in the storage and save it to t

69 4.2.2 Event Search The event search screen is located on the left side Record Playback window. The NVR maintains a log of eac

71. Description This manual applies to the NVR16 network video recorder. The NVR16 network video recorder supports up to 16 network cameras. It can

704.2.3 Text-In Search The NVR maintains a log of each time the text-in data is detected. The Text-In Search screen displays this list. You can sele

714.2.4 Bookmark Search The NVR maintains a log of bookmark data. The Bookmark Search screen displays this list. You can select the bookmark for whi

724.3 Archive Playback Select “Archive Playback” tab on main window of the Client s/w. You can see the camera list currently registered. Select NVR

734.4 Backup Playback Select “Backup Playback” tab on main window of the Client s/w. You can see the camera list currently registered. Select NVR or

745. Appendix 5.1 Troubleshooting Troubleshooting if problems occur, verify the installation of the NVR with the instructions in this manual and wi

755.2 Comprehension about Archive and BACKUP function ARCHIVE BACKUP Description Records a video to the internal storage and copies it to the ext

765.4 Preventive Maintenance Preventive maintenance allows detection and correction of minor that faults before they become serious and cause equipm

77System Requirement for Web Browser Operating System: Microsoft Windows 98, Microsoft Windows ME, Microsoft Windows 2000, Microsoft Windows XP, or

8• Multiple Recording Mode. (Schedule, Pre-Event, Text-In and Event Recording) • Multiple Search Engines. (Date/Time, Calendar, Event, Text-In, Boo

96 Alarm LED Steady yellow for booting or failed upgrade. 7 LAN1 LED Flickers for connection to Ethernet port for client access. 8 LAN2 LED Fli